Ceiling converter plate to suit our THETA LED downlight. Designed to use when retrofitting these downlights into slightly bigger ceiling cutouts (replacing older, larger lights). The converter plate can be used for ceiling openings from 110 – 120mm. The outer diameter of this plate is 140mm. Np clips supplied (held in place by the clips on the downlight itself).

Additional Information:

• Colour: White
• Finish: MATT
• Overall Height: 0.2
• Overall Width: 14
• Overall Depth: 14
• Fitting Diameter: D140
• Fitting Cutout: C110-120
• Fitting Other Dimension: Indent D110
• Fitting Material: Steel
• Primary Material: METAL
• PLU: 75376

Assembly:

If this fitting is supplied unassembled to reduce shipping cost and minimise damage, some assembly by the customer or the installing electrician may be required.

Installation:

If this fitting requires installation, connection to the mains electrical supply, that installation must be performed by a licensed electrician in accordance with the wiring standard.

If this is a hardwired light fitting, and not specifically labelled “DIY” it must be installed by a licenced electrician.